![]() ![]() ![]() Messages, see the result.log file generated on the USB drive's data partition. If an error occurs and the update fails, restart the procedure from Step 1. You don't need to provide any input at this stage. The AWS DeepRacer device will automatically begin the update process after ten seconds. , then select, then, and finally BOOT圆4.EFI.Īfter the compute module has booted, a terminal window will appear on the desktop to display the progress. Turn on the power or reset your AWS DeepRacer device and repeatedly pressįrom the BIOS window, choose Boot From File, then select the option with your boot partition's name, in our case it's named BOOT Insert the USB update media into an available USB port on your compute module. Of the vehicle, in the space between the compute battery and the LED tail light. On either side of and including the port into which the camera is plugged. The AWS DeepRacer device's compute module has three USB ports in the front of the vehicle, Plug the other end into a compatible port on the monitor.Ĭonnect a USB keyboard and mouse. Insert the HDMI end of the cable into the compute module's HDMI port and You'll need an HDMI-to-HDMI, HDMI-to-DVI, or similarĬable. To update your AWS DeepRacer device software to the Ubuntu 20.04 stackĬonnect your AWS DeepRacer device to a monitor. On the Assign Drive Letter or Path page, check the Assign the following drive letter: radio button and select a drive letter from the drop down list, then choose Next. On the Specify Volume Size page, set the Simple volume size in MB to match the Maximum disk space in MB, then choose Next. The New Simple Volume Wizard will appear. To create the NTFS partition with the remaining disk capacity, open the context (right-click) menu on your USB drive's remaining Unallocated space and choose New Simple Volume. Make note of the assigned drive letter, you will need it later to make the FAT32 partition bootable.Ĭheck the Format this volume with the following settings radio button and set the following parameters, then choose Next. On the Specify Volume Size page, set the following parameter and then choose Next. Once the New Simple Volume Wizard appears, do the following: To create the FAT32 partition with a 4 GB capacity, open the context (right-click) menu on your USB drive's Unallocated space and choose New Simple Volume. ![]() Open the Windows command prompt, enter diskmgmt.msc, and choose OKįrom the Disk Management console, select your USB drive. Make note of the BOOT partition's drive path, you will need it to complete the next step. Choose Apply.Īfter the FAT32 and NTFS partitions are created, the USB drive's partition information A warning prompt will appear asking if you want to apply the changes. On the menu bar, choose Edit, then Apply All Operations. To create the NTFS data partition with a minimum 18 GB capacity, select the file icon, Set the following parameters, and choose Add. To create the FAT32 boot partition with a 4 GB capacity, select the file icon on the top-left, If the partitions are locked, open the context (right-click) menu and choose unmount. Once you are sure that you've selected the correct disk, delete all its existing partitions. Match the Size and Model shown in the Device Description with your USB drive. Select your USB drive by going to GParted on the menu bar, then Devices, finally, select your USB drive from the list. A sidebar showing the selected disk's Model, Size, and Path will appear. On the menu bar, choose View, then choose Device Information. To find it on the GParted console and erase the USB drive, do the following: To erase your USB drive, you will need its device path. Sudo apt-get update sudo apt-get install gparted ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |